NSN 3110-01-237-5328
Part Details | BEARING RETAINING PLATE
3110-01-237-5328 A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes END BELL, ELECTRICAL ROTATING EQUIPMENT.
Alternate Parts: 8855421, 885542-1, 8855421, 885542-1, 8855421, 885542-1, 3110-01-237-5328, 01-237-5328, 3110012375328, 012375328
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JUL 31, 1986 | 01-237-5328 | 22293 ( PLATE, RETAINING, BEARING ) |
REFERENCE DRAWINGS & PICTURES
RAISED SURFACE W/ APERTURE
VERTICAL CENTERLINE
SQUARE
Cross Reference | NSN 3110-01-237-5328
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 885542-1 | 49956 | RAYTHEON COMPANYDBA RAYTHEON |
| 885542-1 | 3B150 | RAYTHEON COMPANYDBA RAYTHEON |
| 885542-1 | 54X10 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 3110-01-237-5328
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SQUARE |
| LENGTH | 4.500 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/ APERTURE |
| MINOR THICKNESS | 0.930 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| APERTURE DIAMETER | 1.894 INCHES NOMINAL |
| COUNTERBORE DIAMETER | 2.0635 INCHES MINIMUM AND 2.0645 INCHES MAXIMUM |
| COUNTERBORE DEPTH | 0.406 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| OVERALL THICKNESS | 1.745 INCHES MINIMUM AND 1.755 INCHES MAXIMUM |
| INSIDE RAISED SURFACE DIAMETER | 2.0635 INCHES MINIMUM AND 2.0645 INCHES MAXIMUM |
| OUTSIDE RAISED SURFACE DIAMETER | 0.407 INCHES NOMINAL |
| RAISED SURFACE HEIGHT | 1.375 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MOUNTING HOLE DIAMETER | 0.179 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 VERTICAL CENTERLINE |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 3.500 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 3.500 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.750 INCHES NOMINAL |
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.750 INCHES NOMINAL |
| SPECIAL FEATURES | ONE 0.156 IN. DIA MIN TO 0.160 IN. DIA MAX BLIND HOLE IN OUTER FACE,0.190 IN. DP,COUNTERSUNK 0.187 IN. DIY BY 100.0 DEG,W/ONE MS16562 TUBULAR PIN SPRING INSERTED,LOCATED 0.812 IN. BELOW HORIZ CL AND 1.312 IN. LEFT OF VERT CL |