NSN 3110-01-320-7274
Part Details | BEARING RETAINING PLATE
3110-01-320-7274 A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes END BELL, ELECTRICAL ROTATING EQUIPMENT.
Alternate Parts: 2123469, 3110-01-320-7274, 01-320-7274, 3110013207274, 013207274
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JUN 02, 1990 | 01-320-7274 | 22293 ( PLATE, RETAINING, BEARING ) |
REFERENCE DRAWINGS & PICTURES
VERTICAL CENTERLINE
DEE
Cross Reference | NSN 3110-01-320-7274
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2123469 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3110-01-320-7274
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | DEE |
| OUTSIDE DIAMETER | 2.750 INCHES NOMINAL |
| DISTANCE FROM CENTER OF PLATE TO FLAT | 1.312 INCHES NOMINAL |
| BODY DIAMETER | 1.998 INCHES MINIMUM AND 1.999 INCHES MAXIMUM |
| OVERALL THICKNESS | 1.125 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MOUNTING HOLE DIAMETER | 0.219 INCHES NOMINAL |
| MOUNTING HOLE ARRANGEMENT STYLE | 4 VERTICAL CENTERLINE |
| FIRST BOLT CIRCLE HOLE QUANTITY | 4 |
| SECOND BOLT CIRCLE HOLE QUANTITY | 6 |
| FIRST BOLT CIRCLE DIAMETER | 0.812 INCHES NOMINAL |
| SECOND BOLT CIRCLE DIAMETER | 2.312 INCHES NOMINAL |
| SPECIAL FEATURES | A SECOND SET OF BOLT HOLES 5/16-18UNC-3B BOTTOM TAP AND G(0.261) DRILL BY 0.750 INCH DEEP AND MINUS 0.000 INCH AND PLUS 0.031 INCH COUNTERSUNK 90 DEGREES MINUS 0 DEGREE PLUS 10 DEGREES BY 0.343 INCH DIAMETER OF 4 HOLES; THE EXTERNAL SURFACE WILL BE PAINTED LIGHT GRAY PER MIL-STD-1303 EXPECT OUTER BOLT HOLES AND TWO RAISED SURFACES |