NSN 3110-01-320-9664
Part Details | BEARING RETAINING PLATE
3110-01-320-9664 A comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. It must have drilled and/or tapped holes for mounting purposes. Excludes END BELL, ELECTRICAL ROTATING EQUIPMENT.
Alternate Parts: 2123870, 3110-01-320-9664, 01-320-9664, 3110013209664, 013209664
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JUN 06, 1990 | 01-320-9664 | 22293 ( PLATE, RETAINING, BEARING ) |
REFERENCE DRAWINGS & PICTURES
VERTICAL CENTERLINE
SQUARE
Cross Reference | NSN 3110-01-320-9664
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2123870 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3110-01-320-9664
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SQUARE |
| LENGTH | 2.675 INCHES NOMINAL |
| APERTURE DIAMETER | 1.250 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 VERTICAL CENTERLINE |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 1.937 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 1.937 INCHES NOMINAL |
| DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.968 INCHES NOMINAL |
| DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.968 INCHES NOMINAL |
| SPECIAL FEATURES | THE ITEM IS COATED WITH A DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG1603000; A SECOND SET OF BOLT HOLES CONSISTING OF 0.250-20UNC-3B-BOTTOM TAP NUMBER 4(209)DRILL 0.650 INCH DEEP PLUS 0.31 AND MINUS 0.31 INCH VARIATION COUNTERSUNK 90 DEGREES MINUS 0 AND PLUS 10 DEGREES VARIATION WITH A DIAMETER OF 0.281 INCHES WITH FOUR HOLES |