NSN 4920-01-327-2490
Part Details | AIRCRAFT MAINTENANCE FIXTURE SET
4920-01-327-2490 A group of two or more FIXTURE (1), AIRCRAFT MAINTENANCE. It may also include attachment hardware, gaskets, valves and fittings.
Alternate Parts: 3C3647G01, 4920-01-327-2490, 01-327-2490, 4920013272490, 013272490
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 49 | OCT 10, 1990 | 01-327-2490 | 38189 ( FIXTURE SET, AIRCRAFT MAINTENANCE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 4920-01-327-2490
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3C3647G01 | 66464 | GENERAL ELECTRIC CO |
Technical Data | NSN 4920-01-327-2490
| Characteristic | Specifications |
|---|---|
| END ITEM IDENTIFICATION | F110-GE-100 & F101-GE-102 ENGINE |
| SPECIAL FEATURES | CONSISTS OF A STEEL BASE PLATE WITH A MACHINED PILOT RING THAT IS WELDED ONTO THE PLATE AND INTERFACES WITH THE INSIDE DIAMETER OF THE SHAFT; BASE PLATE HAS 2 PIN HOLES; A STAINLESS STEEL CONICAL SHAPED TUBE IS BOLTED TO A TOP PLATE; A LONG STUD WITH A PINNED KNOB; A STAINLESS STEEL ANGLE RING BOLTED TO THE BASE PLATE; TEST COUPONS LOCATED ON THE TOP OF THE FIXTURE; 2 FOUND BOND TEST BUTTONS WHICH ARE HELD IN PLACE BY 2 POLYTETRAFLUOROETHYLENE HOLDERS; FLAT PLATE COUPONS HELD IN PLACE BY 4 POLYTETRAFLUOROETHYLENE HOLDERS; THIS ITEM IS 14.700 INCH BY 14.700 INCH BY 5.000 INCH AND WEIGHS APPROXIMATELY 34 POUNDS |
| FUNCTIONAL DESCRIPTION | USED TO ACCOMPLISH THE REPAIRS BY POSITIONING THE SHAFT,COVERING UNSPRAYED AREAS TO PREVENT OVERSPRAY AND PROVIDING FOR PLACEMENT OF TEST COUPONS TO MONITOR SPRAY PARAMETERS; USED FOR SEAL TEETH RESTORATION ON OUTER DIAMETER; IN ADDITION IT IS USED TO MASK THE SEAL TEETH DURING GRIT BLASTING - IN PREPARATION FOR THERMAL SPRAY |
| REFERENCE DATA AND LITERATURE | SERD NO. 1516A |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FIXTURE SET |