NSN 4920-01-338-6515
Part Details | AIRCRAFT MAINTENANCE FIXTURE
4920-01-338-6515 A fixture designed to hold/position aircraft components to facilitate inspection, repair, testing and/or replacement of components. D0 not use if a more specific name applies. See FIXTURE (1) (as modified).
Alternate Parts: 3C4225G01, 4920-01-338-6515, 01-338-6515, 4920013386515, 013386515
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 49 | MAY 08, 1991 | 01-338-6515 | 37261 ( FIXTURE, AIRCRAFT MAINTENANCE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 4920-01-338-6515
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3C4225G01 | 66464 | GENERAL ELECTRIC CO |
Technical Data | NSN 4920-01-338-6515
| Characteristic | Specifications |
|---|---|
| FUNCTIONAL DESCRIPTION | THIS FIXTURE IS USED TO REMOVE ONE OR ALL OF THE STAGE 1 LPT NOZZLE SHROUD SEGMENTS FROM THE NOZZLE SHROUD SEGMENTS FROM THE NOZZLE ASSEMBLY; THIS FIXTURE IS USED WITH A SOCKET WRENCH AND A RUBBER MALLET |
| REFERENCE DATA AND LITERATURE | SERD NO. 1931 |
| NOMINAL OVERALL LENGTH | 32.200 INCHES |
| NOMINAL OVERALL WIDTH | 3.000 INCHES |
| SPECIAL FEATURES | FIXTURE CONSISTS OF AN INDEXING SUPPORT RING AND PULLER ASSEMBLY; THE SUPPORT RING HAS AN INVERTED "L" CROSS SECTION; THE OUTER RING HAS 9 EQUALLY SPACED TAPPED HOLES; THE SUPPORT RING HAS A FLANGE WITH 12 EQUALLY SPACED GROUPS OF 3 SLOTS; THE PULLER ASSEMBLY PRIMARILY CONSISTS OF 4 FINGER BLOCKS,A BACK UP PLATE,A BEARING PLATE,A JACK SCREW AND 2 GUIDE RODS; EACH BLOCK HAS A SLOTTED MOUNTING HOLE; TWO GUIDE PINS; TWO KNURLED NUTS |
| END ITEM IDENTIFICATION | F110-GE-129 ENGINE |