NSN 5305-01-476-1218

Part Details | CLOSE TOLERANCE SCREW

5305-01-476-1218 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Alternate Parts: TX1026D3D14AF, TX1026D3D14AF, 3M1169D3D14AF, HP1169D3D14F, 11827D3D14AF, TX1026D3D14AF, TX1026D3D14AF, 5305-01-476-1218, 01-476-1218, 5305014761218, 014761218

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 27, 200001-476-121829294 ( SCREW, CLOSE TOLERANCE )
REFERENCE DRAWINGS & PICTURES

HEXAGON COUNTERSUNK

CROSS RECESS TYPE II

Cross Reference | NSN 5305-01-476-1218
Part Number Cage Code Manufacturer
TX1026D3D14AFC4293ALCOA FASTENING SYSTEMSFAIRCHILDFASTENERS EUROPE - VSD GMBH
TX1026D3D14AF06950ARCONIC GLOBAL FASTENERS & RINGS,INC.
3M1169D3D14AF76301BOEING COMPANY, THEDBA BOEING
HP1169D3D14F0ZC92HEARTLAND PRECISION FASTENERS, INC.
11827D3D14AF59563REID PRODUCTS INC.DBA REID PRODUCTS
TX1026D3D14AF06725SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES
TX1026D3D14AF27624SPS TECHNOLOGIES, LLCDBA PB FASTENERS
Technical Data | NSN 5305-01-476-1218
Characteristic Specifications
THREAD SERIES DESIGNATOR UNJF
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
THREAD CLASS3A
THREAD DIRECTION RIGHT-HAND
THREAD LENGTH0.345 INCHES NOMINAL
FASTENER LENGTH1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM
HEAD STYLE0 HEXAGON COUNTERSUNK
HEAD DIAMETER0.372 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE4 CROSS RECESS TYPE II
SPLINE MAJOR DIAMETER0.155 INCHES NOMINAL
HOLE TYPE DRILLED
HOLE QUANTITY1
HOLE DIAMETER0.070 INCHES NOMINAL
GRIP LENGTH0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT