NSN 5305-01-486-1326

Part Details | CLOSE TOLERANCE SCREW

5305-01-486-1326 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Alternate Parts: C206454D7, C20645-4D7, 939264D7, 93926-4D7, AIC6184D7, AIC618-4D7, 5305-01-486-1326, 01-486-1326, 5305014861326, 014861326

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 19, 200101-486-132629294 ( SCREW, CLOSE TOLERANCE )
REFERENCE DRAWINGS & PICTURES

HEXAGON COUNTERSUNK

OFFSET CRUCIFORM (TORQUE SET)

Cross Reference | NSN 5305-01-486-1326
Part Number Cage Code Manufacturer
C20645-4D781755LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
93926-4D780539SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP
AIC618-4D706725SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES
Technical Data | NSN 5305-01-486-1326
Characteristic Specifications
THREAD SERIES DESIGNATOR UNJF
NOMINAL THREAD DIAMETER0.250 INCHES
THREAD QUANTITY PER INCH28
THREAD CLASS3A
THREAD DIRECTION RIGHT-HAND
THREAD LENGTH0.403 INCHES NOMINAL
FASTENER LENGTH1.443 INCHES NOMINAL
MINIMUM TENSILE STRENGTH3960 POUNDS PER SQUARE INCH
HEAD STYLE1 HEXAGON COUNTERSUNK
HEAD DIAMETER0.374 INCHES NOMINAL
HEAD HEIGHT0.063 INCHES NOMINAL
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE OFFSET CRUCIFORM (TORQUE SET)
GRIP LENGTH0.438 INCHES NOMINAL
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
SPECIAL FEATURESHAS A DRILLED SHANK
END ITEM IDENTIFICATIONF16 ACFT
PART NAME ASSIGNED BY CONTROLLING AGENCYBOLT