NSN 5305-01-488-3728

Part Details | CLOSE TOLERANCE SCREW

5305-01-488-3728 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Alternate Parts: CA21351427RS, CA21351-4-27RS, 5305-01-488-3728, 01-488-3728, 5305014883728, 014883728

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53AUG 23, 200101-488-372829294 ( SCREW, CLOSE TOLERANCE )
REFERENCE DRAWINGS & PICTURES

HEXAGON COUNTERSUNK

CHAMFER DOG

Cross Reference | NSN 5305-01-488-3728
Part Number Cage Code Manufacturer
CA21351-4-27RS92215ARCONIC GLOBAL FASTENERS & RINGS,INC.
Technical Data | NSN 5305-01-488-3728
Characteristic Specifications
THREAD SERIES DESIGNATOR UNF
NOMINAL THREAD DIAMETER0.250 INCHES
THREAD QUANTITY PER INCH28
THREAD CLASS3A
THREAD DIRECTION RIGHT-HAND
THREAD LENGTH0.567 INCHES MINIMUM AND 0.706 INCHES MAXIMUM
FASTENER LENGTH2.107 INCHES NOMINAL
MINIMUM TENSILE STRENGTH2845 POUNDS PER SQUARE INCH
SINGLE SHEAR STRENGTH4140 POUNDS PER SQUARE INCH
HEAD STYLE0 HEXAGON COUNTERSUNK
HEAD DIAMETER0.435 INCHES NOMINAL
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
GRIP LENGTH1.901 INCHES MINIMUM AND 2.040 INCHES MAXIMUM
GRIP DIAMETER0.249 INCHES NOMINAL
POINT STYLE CHAMFER DOG
POINT LENGTH0.100 INCHES NOMINAL
POINT DIAMETER0.211 INCHES MINIMUM AND 0.216 INCHES MAXIMUM
POINT CHAMFER ANGLE45.0 DEGREES NOMINAL
SPECIAL FEATURESDRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AREOSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD-OUT SPRING INSERTED; 2 LEAD THREAD.
SUPPLEMENTARY FEATURESSTUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING
END ITEM IDENTIFICATIONF-22 RAPTOR
PART NAME ASSIGNED BY CONTROLLING AGENCYSTUD BOLT