NSN 5305-01-488-3734
Part Details | CLOSE TOLERANCE SCREW
5305-01-488-3734 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Alternate Parts: CA2135146RS, CA21351-4-6RS, 5305-01-488-3734, 01-488-3734, 5305014883734, 014883734
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | AUG 23, 2001 | 01-488-3734 | 29294 ( SCREW, CLOSE TOLERANCE ) |
REFERENCE DRAWINGS & PICTURES
HEXAGON COUNTERSUNK
CHAMFER DOG
Cross Reference | NSN 5305-01-488-3734
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CA21351-4-6RS | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
Technical Data | NSN 5305-01-488-3734
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.567 INCHES MINIMUM AND 0.706 INCHES MAXIMUM |
| FASTENER LENGTH | 1.237 INCHES NOMINAL |
| MINIMUM TENSILE STRENGTH | 2845 POUNDS PER SQUARE INCH |
| SINGLE SHEAR STRENGTH | 4140 POUNDS PER SQUARE INCH |
| HEAD STYLE | 0 HEXAGON COUNTERSUNK |
| HEAD DIAMETER | 0.435 INCHES NOMINAL |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| GRIP LENGTH | 0.431 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| GRIP DIAMETER | 0.249 INCHES NOMINAL |
| POINT STYLE | CHAMFER DOG |
| POINT LENGTH | 0.100 INCHES NOMINAL |
| POINT DIAMETER | 0.211 INCHES MINIMUM AND 0.216 INCHES MAXIMUM |
| POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SPECIAL FEATURES | DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD-OUT SPRING INSERTED; 2 LEAD THREAD. |
| SUPPLEMENTARY FEATURES | STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING |
| END ITEM IDENTIFICATION | F-22 RAPTOR |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | STUD BOLT |
