NSN 5305-01-504-0534

Part Details | CLOSE TOLERANCE SCREW

5305-01-504-0534 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Alternate Parts: BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, BACB30LH3U3, 5305-01-504-0534, 01-504-0534, 5305015040534, 015040534

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JAN 16, 200301-504-053429294 ( SCREW, CLOSE TOLERANCE )
REFERENCE DRAWINGS & PICTURES

HEXAGON COUNTERSUNK

CROSS RECESS TYPE 1

Cross Reference | NSN 5305-01-504-0534
Part Number Cage Code Manufacturer
BACB30LH3U31RC86ARCONIC GLOBAL FASTENERS & RINGS,INC.
BACB30LH3U306950ARCONIC GLOBAL FASTENERS & RINGS,INC.
BACB30LH3U317943FEDERAL MANUFACTURING CORPORATION
BACB30LH3U356878SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION
BACB30LH3U380539SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP
BACB30LH3U306725SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES
BACB30LH3U327624SPS TECHNOLOGIES, LLCDBA PB FASTENERS
BACB30LH3U381205THE BOEING COMPANYDBA BOEING
BACB30LH3U306710VALLEY-TODECO, INC.DBA ARCONIC FASTENING SYSTEMS AND
BACB30LH3U39N513VOI-SHAN/CHATSWORTHDIV OF VSI CORP
Technical Data | NSN 5305-01-504-0534
Characteristic Specifications
THREAD SERIES DESIGNATOR UNJF
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
THREAD CLASS3A
THREAD DIRECTION RIGHT-HAND
THREAD LENGTH0.345 INCHES NOMINAL
FASTENER LENGTH0.532 INCHES NOMINAL
HEAD STYLE0 HEXAGON COUNTERSUNK
HEAD DIAMETER0.295 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE CROSS RECESS TYPE 1
GRIP LENGTH0.187 INCHES NOMINAL
GRIP DIAMETER0.1890 INCHES MINIMUM AND 0.1985 INCHES MAXIMUM
END ITEM IDENTIFICATIONH-46