NSN 5310-00-845-7769
Part Details | LOCK WASHER
5310-00-845-7769 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: 55144002, 55144-002, NSA55144002, NSA55144-002, 55144002, 55144-002, 55144002, 55144-002, 27S51, 27S5-1, 000004005200000, 1019742001, 1019742-001, 27S51, 27S5-1, G2439981, G243998-1, 718152111, 71-815211-1, 1019742001, 1019742-001, G2439981, G243998-1, 944.48.78.404, 9933161, 993316-1, C74123Z151E10, C74123-Z151-E10, 10889481, 1088948-1, 5310-00-845-7769, 00-845-7769, 5310008457769, 008457769
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-845-7769 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
COUNTERSINK INTERNAL TEETH
Cross Reference | NSN 5310-00-845-7769
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 55144-002 | F5442 | AIRBUS GROUP SAS |
| NSA55144-002 | F5442 | AIRBUS GROUP SAS |
| 55144-002 | F0210 | AIRBUS HELICOPTERS (ETS DEMARIGNANE) |
| 55144-002 | F6198 | AIRBUS OPERATIONS |
| 27S5-1 | D0680 | ALCOA FASTENING SYSTEMSFAIRCHILDFASTENERS EUROPE - CAMLOC |
| 000004005200000 | F0554 | ALKAN |
| 1019742-001 | 05037 | ANACOMP, INC. |
| 27S5-1 | 71286 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| G243998-1 | 71286 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| 71-815211-1 | 07397 | GENERAL DYNAMICS ADVANCEDINFORMATION SYSTEMS INC. |
| 1019742-001 | 0HBH2 | LEXEL IMAGING SYSTEMS, INC. |
| G243998-1 | 01714 | LUCENT TECHNOLOGIES INCADVANCED TECHNOLOGY SYSTEMS |
| 944.48.78.404 | S4080 | PILATUS AIRCRAFT LTD |
| 993316-1 | 82577 | RAYTHEON COMPANYDBA RAYTHEON |
| C74123-Z151-E10 | D1525 | SIEMENS AG AUTOMATISIERUNGSTECHNIKAUT A13 |
| 1088948-1 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
Technical Data | NSN 5310-00-845-7769
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | COUNTERSINK INTERNAL TEETH |
| HOLE DIAMETER | 0.232 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.425 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.008 INCHES MINIMUM AND 0.028 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |