NSN 5310-00-899-9486
Part Details | LOCK WASHER
5310-00-899-9486 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW84, 5310-00-899-9486, 00-899-9486, 5310008999486, 008999486
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1960 | 00-899-9486 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
SPLIT HELICAL-RIGHT HAND
Cross Reference | NSN 5310-00-899-9486
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FFW84 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 5310-00-899-9486
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| HOLE DIAMETER | 0.509 INCHES MINIMUM AND 0.523 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.873 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81348-FFW84 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | D CLASS AND 2 STYLE |
| MINIMUM TENSILE STRENGTH | 77000 POUNDS PER SQUARE INCH |