NSN 5310-01-023-6266
Part Details | LOCK WASHER
5310-01-023-6266 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: 914C3713, 914C371-3, 5310-01-023-6266, 01-023-6266, 5310010236266, 010236266
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 23, 1976 | 01-023-6266 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
SPLIT HELICAL-RIGHT HAND
Cross Reference | NSN 5310-01-023-6266
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 914C371-3 | 94259 | BECHTEL MARINE PROPULSIONCORPORATION |
Technical Data | NSN 5310-01-023-6266
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.334 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.047 INCHES MINIMUM |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| HEAT TREATMENT | QUENCHED AND TEMPERED |