NSN 5310-01-042-2804
Part Details | LOCK WASHER
5310-01-042-2804 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: E246PC28, P6644, P6644, P-6644, 5310-01-042-2804, 01-042-2804, 5310010422804, 010422804
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 08, 1977 | 01-042-2804 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
SPLIT HELICAL-RIGHT HAND
Cross Reference | NSN 5310-01-042-2804
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| E246PC28 | 74965 | CLARK-RELIANCE CORPORATIONDBA JERGUSON |
| P6644 | 74965 | CLARK-RELIANCE CORPORATIONDBA JERGUSON |
| P-6644 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
Technical Data | NSN 5310-01-042-2804
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 82.5 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 84.5 ROCKWELL SUPERFICIAL 15-N MAXIMUM |
| STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| HOLE DIAMETER | 0.188 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.506 INCHES MINIMUM AND 0.533 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.125 INCHES NOMINAL |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| CRITICALITY CODE JUSTIFICATION | ATEST$$AZZZY |