NSN 5310-01-100-8813
Part Details | LOCK WASHER
5310-01-100-8813 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW100, FF-W-100, MS35333137, MS35333-137, 10122137, 5310-01-100-8813, 01-100-8813, 5310011008813, 011008813
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 15, 1980 | 01-100-8813 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT INTERNAL TEETH
Cross Reference | NSN 5310-01-100-8813
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FF-W-100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| MS35333-137 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| 10122137 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 5310-01-100-8813
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| HOLE DIAMETER | 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.680 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.013 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A GRADE AND 1 STYLE AND 2 COMPOSITION |