NSN 5310-01-145-4564
Part Details | LOCK WASHER
5310-01-145-4564 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW100, FF-W-100, MS35333154, MS35333-154, MS35333154, MS35333-154, NASM35333, 21C11606, 21C116-06, 5310-01-145-4564, 01-145-4564, 5310011454564, 011454564
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 12, 1983 | 01-145-4564 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT INTERNAL TEETH
Cross Reference | NSN 5310-01-145-4564
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FF-W-100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| MS35333-154 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS35333-154 | 80205 | NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES |
| NASM35333 | 80205 | NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES |
| 21C116-06 | 06602 | NEXTIRAONE SOLUTIONS LLC |
Technical Data | NSN 5310-01-145-4564
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A GRADE AND 1 STYLE |