NSN 5310-01-147-2448
Part Details | LOCK WASHER
5310-01-147-2448 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW100, FF-W-100, MS35333134, MS35333-134, 100665, 5310-01-147-2448, 01-147-2448, 5310011472448, 011472448
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 14, 1983 | 01-147-2448 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT INTERNAL TEETH
Cross Reference | NSN 5310-01-147-2448
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FF-W-100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| MS35333-134 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| 100665 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
Technical Data | NSN 5310-01-147-2448
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| HOLE DIAMETER | 0.383 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.493 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2 STYLE AND 2 COMPOSITION |