NSN 5310-01-161-6141
Part Details | LOCK WASHER
5310-01-161-6141 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: 7447, 2WA5126 6, 2WA5-126 6, 2WA5126 G, 2WA5-126 G, V7447, 5310-01-161-6141, 01-161-6141, 5310011616141, 011616141
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 08, 1983 | 01-161-6141 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-161-6141
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7447 | 85578 | MARK CONTROLS CORPPACIFIC VALVES DIV |
| 2WA5-126 6 | 85578 | MARK CONTROLS CORPPACIFIC VALVES DIV |
| 2WA5-126 G | 85578 | MARK CONTROLS CORPPACIFIC VALVES DIV |
| V7447 | 85578 | MARK CONTROLS CORPPACIFIC VALVES DIV |
Technical Data | NSN 5310-01-161-6141
| Characteristic | Specifications |
|---|---|
| HOLE DIAMETER | 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.049 INCHES NOMINAL |
| SPECIAL FEATURES | TRIANGULAR SNAPE; WIDTH1.750 IN.; HEIGHT 1.500 IN.; DISTANCE FROM CENTER LINE TO FLAT 0.500 IN. |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| CRITICALITY CODE JUSTIFICATION | ZZZY |