NSN 5310-01-234-3108
Part Details | LOCK WASHER
5310-01-234-3108 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW100, FF-W-100, 0740878, MS35333167, MS35333-167, F44, 5310-01-234-3108, 01-234-3108, 5310012343108, 012343108
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 13, 1986 | 01-234-3108 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT INTERNAL TEETH
Cross Reference | NSN 5310-01-234-3108
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FF-W-100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 0740878 | S3002 | GENERAL DYNAMICS EUROPEAN,LAND-SYSTEMS-MOWAG GMBH |
| MS35333-167 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| F44 | 00365 | TLD ACE CORPORATION |
Technical Data | NSN 5310-01-234-3108
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| HOLE DIAMETER | 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A GRADE |