NSN 5310-01-249-3712
Part Details | LOCK WASHER
5310-01-249-3712 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW100, FF-W-100, MS3533660, MS35336-60, MS3533636, MS35336-36, 5310-01-249-3712, 01-249-3712, 5310012493712, 012493712
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 11, 1987 | 01-249-3712 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
COUNTERSINK EXTERNAL TEETH
Cross Reference | NSN 5310-01-249-3712
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FF-W-100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| MS35336-60 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS35336-36 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
Technical Data | NSN 5310-01-249-3712
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 85.0 ROCKWELL B MINIMUM AND 95.0 ROCKWELL B MAXIMUM |
| STYLE DESIGNATOR | COUNTERSINK EXTERNAL TEETH |
| HOLE DIAMETER | 0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.599 INCHES NOMINAL |
| MATERIAL THICKNESS | 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 4 TYPE AND 3 COMPOSITION |