NSN 5310-01-414-2968

Part Details | FLAT WASHER

5310-01-414-2968 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 6297826, 5310-01-414-2968, 01-414-2968, 5310014142968, 014142968

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 04, 199501-414-296813393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

DEE

Cross Reference | NSN 5310-01-414-2968
Part Number Cage Code Manufacturer
629782653711NAVAL SEA SYSTEMS COMMAND
Technical Data | NSN 5310-01-414-2968
Characteristic Specifications
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.232 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE DEE
CENTER HOLE WIDTH0.208 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM