NSN 5310-01-415-8866

Part Details | SLEEVE NUT

5310-01-415-8866 An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY.

Alternate Parts: 80363974260A115, 803-6397426-0A-115, 6397526 0A115, 6397526 0A-115, 5310-01-415-8866, 01-415-8866, 5310014158866, 014158866

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUL 09, 199501-415-886629735 ( NUT, SLEEVE )
REFERENCE DRAWINGS & PICTURES

SLEEVE

Cross Reference | NSN 5310-01-415-8866
Part Number Cage Code Manufacturer
803-6397426-0A-11553711NAVAL SEA SYSTEMS COMMAND
6397526 0A-11553711NAVAL SEA SYSTEMS COMMAND
Technical Data | NSN 5310-01-415-8866
Characteristic Specifications
THREAD SERIES UNC
NOMINAL THREAD SIZE0.750 INCHES
THREAD QUANTITY PER INCH10
THREAD CLASS2B
THREAD DIRECTION RIGHT-HAND
NUT STYLE SLEEVE
NUT DIAMETER1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM
NUT LENGTH0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BOSS DIAMETERB0.920 INCHES AND C0.960 INCHES
BOSS THICKNESSB0.170 INCHES AND C0.210 INCHES
SPECIAL FEATURESFOUR HOLES LOCATED ALONG THE FLANGE DIAMETER EACH WITH A OD OF .200 INCHES