NSN 5310-01-426-2313

Part Details | FLAT WASHER

5310-01-426-2313 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: LS35318D06, 5310-01-426-2313, 01-426-2313, 5310014262313, 014262313

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAR 07, 199601-426-231313393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

DEE

ROUND

Cross Reference | NSN 5310-01-426-2313
Part Number Cage Code Manufacturer
LS35318D0698897LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
Technical Data | NSN 5310-01-426-2313
Characteristic Specifications
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE DEE
WIDTH0.395 INCHES MINIMUM AND 0.428 INCHES MAXIMUM
OVERALL DIAMETER0.435 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM