NSN 5310-01-437-7274

Part Details | FLAT WASHER

5310-01-437-7274 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 2110130 ITEM 6, 21-10130 ITEM 6, 2406278, 24-06278, 5896953255 ITEM 6 REV C, 589-6953255 ITEM 6 REV C, 5310-01-437-7274, 01-437-7274, 5310014377274, 014377274

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53OCT 23, 199601-437-727413393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-437-7274
Part Number Cage Code Manufacturer
21-10130 ITEM 6S8828MACGREGOR SWEDEN AB
24-062780H7R3MACGREGOR USA INC.DIV MACGREGOR USA
589-6953255 ITEM 6 REV C94421MILITARY SEALIFT COMMAND
Technical Data | NSN 5310-01-437-7274
Characteristic Specifications
HOLE DIAMETER41.0 MILLIMETERS NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER50.0 MILLIMETERS NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS4.0 MILLIMETERS NOMINAL