NSN 5310-01-441-3330

Part Details | FLAT WASHER

5310-01-441-3330 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 1560AS135, 1560AS125, 5310-01-441-3330, 01-441-3330, 5310014413330, 014413330

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53FEB 10, 199701-441-333013393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

ROUND

ROUND

Cross Reference | NSN 5310-01-441-3330
Part Number Cage Code Manufacturer
1560AS13530003NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT
1560AS12530003NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT
Technical Data | NSN 5310-01-441-3330
Characteristic Specifications
HOLE DIAMETER2.300 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
CENTER HOLE SHAPE STYLE ROUND
THICKNESS0.280 INCHES NOMINAL
SPECIAL FEATURESONE SIDE OF WASHER IS CHAMFERED 15 DEGREES
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT