NSN 5310-01-444-2973

Part Details | FLAT WASHER

5310-01-444-2973 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 3387C25H05, 3387C25H05, 5310-01-444-2973, 01-444-2973, 5310014442973, 014442973

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 03, 199701-444-297313393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-444-2973
Part Number Cage Code Manufacturer
3387C25H0534881DYNATHERM CORP
3387C25H0504804NORTHROP GRUMMAN SYSTEMS CORPORATIONDBA ES POWER CONTROL SYSTEMS
Technical Data | NSN 5310-01-444-2973
Characteristic Specifications
HOLE DIAMETER0.253 INCHES MINIMUM AND 0.263 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
CRITICALITY CODE JUSTIFICATIONZZZY