NSN 5310-01-445-8160

Part Details | FLAT WASHER

5310-01-445-8160 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 2063B065, 2063B-065, 2063B001 ITEM NO 65, 2063B-001 ITEM NO 65, 5310-01-445-8160, 01-445-8160, 5310014458160, 014458160

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 13, 199701-445-816013393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-445-8160
Part Number Cage Code Manufacturer
2063B-0650BJ09C.S. CONTROLS, INCORPORATED
2063B-001 ITEM NO 650BJ09C.S. CONTROLS, INCORPORATED
Technical Data | NSN 5310-01-445-8160
Characteristic Specifications
HOLE DIAMETER15.010 INCHES MINIMUM AND 15.020 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER19.850 INCHES MINIMUM AND 19.910 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM