NSN 5310-01-446-2244

Part Details | FLAT WASHER

5310-01-446-2244 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 26795, 5310-01-446-2244, 01-446-2244, 5310014462244, 014462244

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 26, 199701-446-224413393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-446-2244
Part Number Cage Code Manufacturer
2679561404CERTANIUM ALLOYS AND RESEARCH CODIV OF PREMIER INDUSTRIAL CORP
Technical Data | NSN 5310-01-446-2244
Characteristic Specifications
HOLE DIAMETER0.125 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.310 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.035 INCHES NOMINAL
SPECIAL FEATURESTHIS ITEM IS HEADMARKED FOR EASY IDENTIFICATION AND TRACEABILITY. IT CONTAINS ALLOY STEEL SPECIFICALLY PROCESSED FOR MAXIMUM RESISTANCE TO STRESS CORROSION
ENVIRONMENTAL PROTECTION CORROSION RESISTANT
MINIMUM TENSILE STRENGTH140000 POUNDS PER SQUARE INCH
END ITEM IDENTIFICATIONNON AIRCRAFT. PART USED FOR FIXTURES