NSN 5310-01-454-1996

Part Details | FLAT WASHER

5310-01-454-1996 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: REPAIR PART, LLH436080, LL-H43-6080, B412025, B4-120-25, 5310-01-454-1996, 01-454-1996, 5310014541996, 014541996

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAR 23, 199801-454-199613393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-454-1996
Part Number Cage Code Manufacturer
REPAIR PART89875DEFENSE LOGISTICS AGENCYDIRECTORATE OF MEDICAL MATERIEL
LL-H43-608066736NAVAL MEDICAL MATERIAL SUPPORTCOMMAND DETACHMENT
B4-120-258J633SLIPPER THEATER SUPPLY
Technical Data | NSN 5310-01-454-1996
Characteristic Specifications
SPECIAL FEATURESSLIP RING; USED ON BALANCE MECHANISM ASSEMBLY; END ITEM APPLICATION LIGHT SURGICAL CEILING; MODEL HA43