NSN 5310-01-461-0285

Part Details | FLAT WASHER

5310-01-461-0285 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: TRJD4876, TRJD-4876, 102500551, 10250055-1, 5310-01-461-0285, 01-461-0285, 5310014610285, 014610285

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53NOV 24, 199801-461-028513393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

BLANK RECTANGULAR

ROUND

RECTANGULAR

ROUND

Cross Reference | NSN 5310-01-461-0285
Part Number Cage Code Manufacturer
TRJD-487660380TIMKEN AEROSPACE, INCDBA TORRINGTON PRODUCT
10250055-118876U S ARMY AVIATION AND MISSILECOMMAND
Technical Data | NSN 5310-01-461-0285
Characteristic Specifications
HOLE DIAMETER3.062 INCHES MINIMUM AND 3.072 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER4.7180 INCHES MINIMUM AND 4.7195 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE BLANK RECTANGULAR
THICKNESS0.3095 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM
SPECIAL FEATURESPART NAME ASSIGNED BY MANUFACTURER WASHER, THRUST
END ITEM IDENTIFICATIONPART NUMBER 11450045