NSN 5310-01-462-2758

Part Details | FLAT WASHER

5310-01-462-2758 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 4M28412, 4M284-12, 4M28412, 4M284-12, T4M28412, T4M284-12, T4M28412, T4M284-12, 5310-01-462-2758, 01-462-2758, 5310014622758, 014622758

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JAN 28, 199901-462-275813393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-462-2758
Part Number Cage Code Manufacturer
4M284-1276301BOEING COMPANY, THEDBA BOEING
4M284-1258009MOELLER MANUFACTURING & SUPPLY, INC.
T4M284-1204946STANDARD WIRE & CABLE CO.DBA AMERICAN WIRE SALES
T4M284-1259570TRICO MANUFACTURING INC.
Technical Data | NSN 5310-01-462-2758
Characteristic Specifications
HOLE DIAMETER0.757 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER1.250 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.0672 INCHES NOMINAL
SPECIAL FEATURESWASHER-PLAIN AND COUNTERSUNK,17-4PH CRES,1200 DEGREE F
CRITICALITY CODE JUSTIFICATIONAGAV
END ITEM IDENTIFICATIONF18 E/F