NSN 5310-01-466-4926

Part Details | FLAT WASHER

5310-01-466-4926 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 882056414, 88-20564-14, 8820564, 88-20564, FFW92 TYPE A CLE GRI, FF-W-92 TYPE A CLE GRI, FFW92, FF-W-92, 5310-01-466-4926, 01-466-4926, 5310014664926, 014664926

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUL 21, 199901-466-492613393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-466-4926
Part Number Cage Code Manufacturer
88-20564-1430554DEPARTMENT OF DEFENSE PROJECTMANAGER-MOBILE ELECTRIC POWER
88-2056430554DEPARTMENT OF DEFENSE PROJECTMANAGER-MOBILE ELECTRIC POWER
FF-W-92 TYPE A CLE GRI81348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
FF-W-9281348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
Technical Data | NSN 5310-01-466-4926
Characteristic Specifications
HOLE DIAMETER0.375 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.875 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.083 INCHES NOMINAL
END ITEM IDENTIFICATION6115-01-274-7390;60KW TQG GENERATOR FAMILY