NSN 5310-01-468-8011

Part Details | FLAT WASHER

5310-01-468-8011 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: DNSL099002 PC 20, D-NSL-0-99-002 PC 20, DNSL099002, D-NSL-0-99-002, A0285NS001, A-028-5NS-0-01, 5310-01-468-8011, 01-468-8011, 5310014688011, 014688011

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53OCT 22, 199901-468-801113393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-468-8011
Part Number Cage Code Manufacturer
D-NSL-0-99-002 PC 2010941CARVER PUMP COMPANY (INC)
D-NSL-0-99-00210941CARVER PUMP COMPANY (INC)
A-028-5NS-0-0110941CARVER PUMP COMPANY (INC)
Technical Data | NSN 5310-01-468-8011
Characteristic Specifications
HOLE DIAMETER0.750 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
END ITEM IDENTIFICATIONUSED ON NIMITZ CLASS CVN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT