NSN 5310-01-469-2762

Part Details | FLAT WASHER

5310-01-469-2762 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 3724643, 372464-3, 5310-01-469-2762, 01-469-2762, 5310014692762, 014692762

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53NOV 09, 199901-469-276213393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

BLANK RECTANGULAR

RECTANGULAR

RECTANGULAR

ROUND

Cross Reference | NSN 5310-01-469-2762
Part Number Cage Code Manufacturer
372464-398897LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
Technical Data | NSN 5310-01-469-2762
Characteristic Specifications
HOLE DIAMETER0.327 INCHES MINIMUM AND 0.334 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE RECTANGULAR
LENGTH2.000 INCHES NOMINAL
WIDTH ACROSS FLATS0.650 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.080 INCHES NOMINAL
END CUT ANGLE40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
SPECIAL FEATURES2 HOLES, ABOVE DIAMETER, SPACED 1.22 IN. BETWEEN CENTERS; 0.36 IN. TO CENTER FROM FLAT SIDE; 0.38 IN. TO CENTER FROM EACH END
END ITEM IDENTIFICATIONSPACER FITTING, SIDE PANEL TO LONGERON, CANTED FUS STA 847.0; C-130B ACFT