NSN 5310-01-470-5677

Part Details | FLAT WASHER

5310-01-470-5677 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: KS141011522, KS1410-11522, 5310-01-470-5677, 01-470-5677, 5310014705677, 014705677

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53DEC 23, 199901-470-567713393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-470-5677
Part Number Cage Code Manufacturer
KS1410-1152284955KAMAN AEROSPACE CORPORATIONDBA AIR VEHICLES & MRO DIVISION
Technical Data | NSN 5310-01-470-5677
Characteristic Specifications
HOLE DIAMETER0.938 INCHES MINIMUM AND 0.968 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER1.345 INCHES MINIMUM AND 1.375 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM
SPECIAL FEATURESFLAT WITHIN 0.007 IN. NOMINAL AND PARALLEL WITHIN 0.002 IN. NOMINAL; BURRS AND SHARP EDGES REMOVED