NSN 5310-01-472-6084

Part Details | FLAT WASHER

5310-01-472-6084 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: LS35318S10, 5310-01-472-6084, 01-472-6084, 5310014726084, 014726084

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAR 09, 200001-472-608413393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

DEE

ROUND

Cross Reference | NSN 5310-01-472-6084
Part Number Cage Code Manufacturer
LS35318S1098897LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
Technical Data | NSN 5310-01-472-6084
Characteristic Specifications
HOLE DIAMETER0.315 INCHES MINIMUM AND 0.335 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE DEE
WIDTH0.518 INCHES MINIMUM AND 0.550 INCHES MAXIMUM
OVERALL DIAMETER0.555 INCHES MINIMUM AND 0.580 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.064 INCHES NOMINAL
END ITEM IDENTIFICATIONHERCULES FIXED WING AIRCRAFT, MODEL C130J