NSN 5310-01-472-9889

Part Details | FLAT WASHER

5310-01-472-9889 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: FFW92, FF-W-92, 7108324, 2527108324 PN 133, 252-7108324 PN 133, 5310-01-472-9889, 01-472-9889, 5310014729889, 014729889

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAR 23, 200001-472-988913393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-472-9889
Part Number Cage Code Manufacturer
FF-W-9281348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
710832453711NAVAL SEA SYSTEMS COMMAND
252-7108324 PN 13353711NAVAL SEA SYSTEMS COMMAND
Technical Data | NSN 5310-01-472-9889
Characteristic Specifications
HOLE DIAMETER0.140 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.281 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A GRADE AND B STYLE
END ITEM IDENTIFICATIONUSED ON SUB ENGINEERING AND DIESEL SYSTEMS