NSN 5310-01-474-8828

Part Details | FLAT WASHER

5310-01-474-8828 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 264340501 ITEM 57, 2643-405-01 ITEM 57, 264180940 ITEM 23, 2641-809-40 ITEM 23, 264180940, 2641-809-40, 8457285244 ITEM 57CP, 845-7285244 ITEM 57CP, 264340501 ITEM 57CP, 2643-405-01 ITEM 57CP, 8457285244 ITEM 57, 845-7285244 ITEM 57, 7285244, 5310-01-474-8828, 01-474-8828, 5310014748828, 014748828

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 16, 200001-474-882813393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-474-8828
Part Number Cage Code Manufacturer
2643-405-01 ITEM 5796169ELECTRIC BOAT CORPORATION
2641-809-40 ITEM 2396169ELECTRIC BOAT CORPORATION
2641-809-4096169ELECTRIC BOAT CORPORATION
845-7285244 ITEM 57CP03950NAVAL INVENTORY CONTROL POINTMECHANICSBURG
2643-405-01 ITEM 57CP03950NAVAL INVENTORY CONTROL POINTMECHANICSBURG
845-7285244 ITEM 5753711NAVAL SEA SYSTEMS COMMAND
728524453711NAVAL SEA SYSTEMS COMMAND
Technical Data | NSN 5310-01-474-8828
Characteristic Specifications
HOLE DIAMETER0.531 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER1.125 INCHES MINIMUM AND 1.126 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.044 INCHES MINIMUM AND 0.048 INCHES MAXIMUM
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CRITICALITY CODE JUSTIFICATIONZZZY
END ITEM IDENTIFICATIONNAVY EQUIP