NSN 5310-01-475-0225

Part Details | FLAT WASHER

5310-01-475-0225 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 10181254001, 10181-2540-01, 101812540, 10181-2540, 5310-01-475-0225, 01-475-0225, 5310014750225, 014750225

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 18, 200001-475-022513393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-475-0225
Part Number Cage Code Manufacturer
10181-2540-0114304HARRIS CORPORATIONDBA HARRIS RF COMMUNICATION
10181-254014304HARRIS CORPORATIONDBA HARRIS RF COMMUNICATION
Technical Data | NSN 5310-01-475-0225
Characteristic Specifications
HARDNESS RATING55.0 DUROMETER MINIMUM AND 65.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.500 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.700 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.060 INCHES NOMINAL
SPECIAL FEATURESWASHER, D HOLE, GPS
END ITEM IDENTIFICATIONNAVY EQUIPMENT/WASHER FOR RADIO PRODUCTS
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT