NSN 5310-01-481-0486

Part Details | FLAT WASHER

5310-01-481-0486 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 2799859015, 2799859-015, 2799859015, 2799859-015, 5310-01-481-0486, 01-481-0486, 5310014810486, 014810486

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53DEC 15, 200001-481-048613393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-481-0486
Part Number Cage Code Manufacturer
2799859-01558568ENVIROVAC INCDBA MONOGRAM SYSTEMS-ROCKFORD DIV
2799859-01547WD8EVAC NORTH AMERICA INC.
Technical Data | NSN 5310-01-481-0486
Characteristic Specifications
SPECIAL FEATURESM10; 4 UNITS PER ASSEMBLY; PART NAME ASSIGNED BY CONTROLLING COMMERICAL AGENCY IS WASHER, PLAIN
END ITEM IDENTIFICATIONSEWAGE TREATMENT ASSEMBLY