NSN 5310-01-482-0103

Part Details | FLAT WASHER

5310-01-482-0103 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 4472567 PC NO. 4, 4472567, 1224472567 PC NO. 4, 122-4472567 PC NO. 4, 5310-01-482-0103, 01-482-0103, 5310014820103, 014820103

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53FEB 05, 200101-482-010313393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

Cross Reference | NSN 5310-01-482-0103
Part Number Cage Code Manufacturer
4472567 PC NO. 453711NAVAL SEA SYSTEMS COMMAND
447256753711NAVAL SEA SYSTEMS COMMAND
122-4472567 PC NO. 481898SUPERVISOR OF SHIPBUILDINGCONVERSION AND REPAIR USN
Technical Data | NSN 5310-01-482-0103
Characteristic Specifications
HOLE DIAMETER1.188 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.125 INCHES NOMINAL
SPECIAL FEATURESSTYLE UNIQUE;TWO HOLES DRILLED & COUNTERSUNK ON SURFACE 2.188 IN NOM APART;ONE EDGE 1.750 IN NOM RADIUS FROM CENTER HOLE;SECOND EDGE 1.250 IN NOM RADIUS FROM CENTER HOLE