NSN 5310-01-482-0228

Part Details | FLAT WASHER

5310-01-482-0228 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 2557733, 1222557733 PC NO. 36, 122-2557733 PC NO. 36, 5310-01-482-0228, 01-482-0228, 5310014820228, 014820228

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53FEB 06, 200101-482-022813393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-482-0228
Part Number Cage Code Manufacturer
255773353711NAVAL SEA SYSTEMS COMMAND
122-2557733 PC NO. 3681898SUPERVISOR OF SHIPBUILDINGCONVERSION AND REPAIR USN
Technical Data | NSN 5310-01-482-0228
Characteristic Specifications
HOLE DIAMETER0.750 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER2.000 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.062 INCHES NOMINAL