NSN 5310-01-484-6590

Part Details | FLAT WASHER

5310-01-484-6590 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 255J19, WR36801 FIG 74 INDEX NO 23, WR-3-680-1 FIG 7-4 INDEX NO 23, 5310-01-484-6590, 01-484-6590, 5310014846590, 014846590

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 03, 200101-484-659013393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-484-6590
Part Number Cage Code Manufacturer
255J1918740YALE INDUSTRIAL PRODUCTS, INC.DBA COFFING HOISTS
WR-3-680-1 FIG 7-4 INDEX NO 2318740YALE INDUSTRIAL PRODUCTS, INC.DBA COFFING HOISTS
Technical Data | NSN 5310-01-484-6590
Characteristic Specifications
HOLE DIAMETER0.625 INCHES NOMINAL
OVERALL DIAMETER1.125 INCHES NOMINAL
THICKNESS0.030 INCHES MINIMUM AND 0.032 INCHES MAXIMUM
END ITEM IDENTIFICATIONHOIST, 2 TON
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT