NSN 5310-01-485-6314

Part Details | FLAT WASHER

5310-01-485-6314 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 1231873, 123187-3, 5310-01-485-6314, 01-485-6314, 5310014856314, 014856314

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 01, 200101-485-631413393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

DEE

DEE

Cross Reference | NSN 5310-01-485-6314
Part Number Cage Code Manufacturer
123187-382340EDO LLC
Technical Data | NSN 5310-01-485-6314
Characteristic Specifications
HOLE DIAMETER1.259 INCHES MINIMUM AND 1.269 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE DEE
WIDTH1.660 INCHES NOMINAL
OVERALL DIAMETER2.160 INCHES NOMINAL
CENTER HOLE SHAPE STYLE DEE
SPECIAL FEATURESROUND EDGE CUT TWO FLATS AT 45 DEGREES AND THREE PILOT HOLES AT 0.09
END ITEM IDENTIFICATIONTORPEDO,CONSU