NSN 5310-01-486-0354

Part Details | FLAT WASHER

5310-01-486-0354 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: ISO7092A4M10, ISO7092-A4-M10, 5310-01-486-0354, 01-486-0354, 5310014860354, 014860354

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 18, 200101-486-035413393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-486-0354
Part Number Cage Code Manufacturer
ISO7092-A4-M10I9008INTERNATIONAL ORGANIZATION FORSTANDARDIZATION (ISO)
Technical Data | NSN 5310-01-486-0354
Characteristic Specifications
HOLE DIAMETER10.50 MILLIMETERS MINIMUM AND 10.77 MILLIMETERS MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER17.57 MILLIMETERS MINIMUM AND 18.00 MILLIMETERS MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS1.4 MILLIMETERS MINIMUM AND 1.8 MILLIMETERS MAXIMUM
END ITEM IDENTIFICATION1055-01-450-4243;LAUNCHER,ROCKET,ARMORED VEHICLE MOUNTED;MULTIPLE LAUNCH ROCKET SYSTEM