NSN 5310-01-486-2775

Part Details | FLAT WASHER

5310-01-486-2775 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 37692116000 ITEM 14, 376-92116-000 ITEM 14, 02116786C006, 021-16786C006, 02116786000, 021-16786-000, 5310-01-486-2775, 01-486-2775, 5310014862775, 014862775

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 25, 200101-486-277513393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-486-2775
Part Number Cage Code Manufacturer
376-92116-000 ITEM 1466935JOHNSON CONTROLS NAVY SYSTEMS, LLC
021-16786C00666935JOHNSON CONTROLS NAVY SYSTEMS, LLC
021-16786-00066935JOHNSON CONTROLS NAVY SYSTEMS, LLC
Technical Data | NSN 5310-01-486-2775
Characteristic Specifications
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.594 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER1.188 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.097 INCHES MINIMUM AND 0.121 INCHES MAXIMUM
END ITEM IDENTIFICATIONCONTROL PANEL