NSN 5310-01-486-2861

Part Details | FLAT WASHER

5310-01-486-2861 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 5589568, 1225589568 PC 13, 122-5589568 PC 13, 1225589566 PC 15, 122-5589566 PC 15, 5310-01-486-2861, 01-486-2861, 5310014862861, 014862861

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 25, 200101-486-286113393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-486-2861
Part Number Cage Code Manufacturer
558956853711NAVAL SEA SYSTEMS COMMAND
122-5589568 PC 1353711NAVAL SEA SYSTEMS COMMAND
122-5589566 PC 1553711NAVAL SEA SYSTEMS COMMAND
Technical Data | NSN 5310-01-486-2861
Characteristic Specifications
HOLE DIAMETER2.062 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER3.000 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.750 INCHES NOMINAL
SPECIAL FEATURESTWO HOLES 180 DEGREES APART DRILLED THRU,DIA 0.375 IN. NOM.,CENTER OF HOLES 0.375 IN. NOM. FROM TOP SURFACE
END ITEM IDENTIFICATIONHATCH BALLIST