NSN 5310-01-487-6635

Part Details | FLAT WASHER

5310-01-487-6635 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 1242266903 PN 40, 124-2266903 P/N 40, 1242266898 PN 26, 124-2266898 P/N 26, 1242266896 PN 08, 124-2266896 P/N 08, 5310-01-487-6635, 01-487-6635, 5310014876635, 014876635

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53AUG 14, 200101-487-663513393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-487-6635
Part Number Cage Code Manufacturer
124-2266903 P/N 4053711NAVAL SEA SYSTEMS COMMAND
124-2266898 P/N 2653711NAVAL SEA SYSTEMS COMMAND
124-2266896 P/N 0853711NAVAL SEA SYSTEMS COMMAND
Technical Data | NSN 5310-01-487-6635
Characteristic Specifications
HOLE DIAMETER1.562 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER3.000 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.109 INCHES NOMINAL
END ITEM IDENTIFICATIONHATCH BAL,17'