NSN 5310-01-487-7469

Part Details | FLAT WASHER

5310-01-487-7469 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 1674M68P04, 1674M68, 5310-01-487-7469, 01-487-7469, 5310014877469, 014877469

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53AUG 16, 200101-487-746913393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

BLANK RECTANGULAR

RECTANGULAR

ROUND W/FLATS

Cross Reference | NSN 5310-01-487-7469
Part Number Cage Code Manufacturer
1674M68P0407482GENERAL ELECTRIC COMPANYDBA GE
1674M6807482GENERAL ELECTRIC COMPANYDBA GE
Technical Data | NSN 5310-01-487-7469
Characteristic Specifications
HOLE DIAMETER0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE RECTANGULAR
LENGTH1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM
WIDTH ACROSS FLATS1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND W/FLATS
HOLE WIDTH ACROSS FLATS0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.076 INCHES MINIMUM AND 0.084 INCHES MAXIMUM
END ITEM IDENTIFICATIONENGINE,AIRCRAFT,F110-GE-100