NSN 5310-01-488-4129

Part Details | FLAT WASHER

5310-01-488-4129 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: MS15775807, MS15775-807, MS15775807, MS15775-807, 5310-01-488-4129, 01-488-4129, 5310014884129, 014884129

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53AUG 23, 200101-488-412913393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-488-4129
Part Number Cage Code Manufacturer
MS15775-80734228L3 TECHNOLOGIES, INC.DBA L3 KEO
MS15775-80796906MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS
Technical Data | NSN 5310-01-488-4129
Characteristic Specifications
END ITEM IDENTIFICATIONNSN 1240-01-487-0870, PERISCOPE